Product ID:OC500A, 290
MSDS Date:07/11/1989
FSC:7930
NIIN:00N028512
MSDS Number: BMYBD

OXFORD CHEMICALS INC

ATLANTA, GA 30366
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 404-452-1100

Cage: 06645

OXFORD CHEMICALS INC

ATLANTA, GA 30366 US

Telephone: 404-452-1100

Cage: 06645

2-BUTANONE; (METHYL ETHYL KETONE)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 35%

OSHA PEL 200 PPM;300 PPM STEL

ACGIH TLV: 200 PPM;300 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 46%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ACETIC ACID, VINYL ESTER, POLYMER WITH CHLOROETHYLENE;

CAS: 9003-22-9

RTECS: AK0950000

Fraction By Weight: 12%

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

PHOSPHORIC ACID, TRITOLYL ESTER; (TRI ARYL PHOSPHATE)

CAS: 1330-78-5

RTECS: TD0175000

Fraction By Weight: 2%

PHTHALIC ACID, BIS(2-ETHYLHEXYL) ESTER; (DI-SEC-OCTYL

CAS: 117-81-7

RTECS: TI0350000

Fraction By Weight: 2%

OSHA PEL 5 MG/M3;10 STEL

ACGIH TLV: 5 MG/M3;10 STEL

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

MINERAL OIL, SLAB OIL; (ALIPHATIC PETROLEUM HYDROCARBON

CAS: 8042-47-5

RTECS: PY8047000

Fraction By Weight: 1%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL OR FATAL IF SWALLOWED. VAPOR
HARMFUL. VAPORS CAN CAUSE NAUSEA, DIZZINESS, FATIGUE, AND HEADACHE.
IRRITATING TO SKIN AND EYES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH IMMEDIATELY WITH WATER AND CONTINUE FOR AT LEAST
15 MINUTES. CONTACT MD IMMED. SKIN: WASH OFF WITH SOAP AND WATER.
INGEST: DO NOT INDUCE VOMITING. GIVE A GLASS OF WATER. DO NOT GIVE
LARGE AMOUNTS OF WATER AS THIS MAY CAUSE VOMITING. CONTACT MD
IMMED. INHAL: MOVE INDIVIDUAL TO FRESH AIR. IF BREATHING DFCLT,
ADMIN OXYGEN. IF BRTHG STOPS, GIVE ARTF RESP. CONTACT MD IMMED.

Flash Point Method:TCC
Flash Point:16.0F,-8.9C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER TO COOL INTACT CONTAINERS TO HELP
PREVENT RUPTURE AND EXPLOSION.
Unusual Fire/Explosion Hazard:PRODUCT EXTREMELY FLAMMABLE. VAPORS ARE
HEAVIER THAN AIR AND CAN TRAVEL ALONG THE FLOOR WHERE THEY CAN BE
IGNITED BY SPARKS OR OPEN FLAME.

Spill Release Procedures:SM:EXTING ALL SOURCES OF IGNIT. PICK UP ON
ABSORB MATL. EVAP. DISCARD DRIED RESIDUE. LRG:EXTING ALL SOURCES OF
IGNIT. PROVIDE NIOSH/MSHA APPRVD SUPPLIED AIR RESP TO CLEANUP PERS.
DIKE AREA TO CONTAIN SPILL. PUMP LIQ TO SUITABLE CNTNR. PICK(SUPP
DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY LOCATION. KEEP
CONTAINER TIGHTLY CLOSED WHEN NOT IN USE. DO NOT STORE NEAR HEAT,
SPARKS, OR OPEN FLAME.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:PROVIDE NIOSH/MSHA APPROVED RESPIRATOR SUITABLE
FOR ORGANIC VAPORS.
Ventilation:PROVIDE SUFF GENERAL MECH VENT & LOCAL EXHST TO KEEP CONC
OF ALL COMPONENTS BELOW THEIR TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED FOR NORMAL USE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC: UP RESIDUE ON ABSORBENT MATERIAL OR SHOVEL UP DRIED
COATING. TRANSPORT TO AUTHORIZED CHEMICAL WASTE TREATMENT FACILITY.

HCC:F3
Boiling Pt:B.P. Text:172F,78C
Vapor Pres:43 @ 20C
Vapor Density:2.87
Spec Gravity:0.86
Evaporation Rate & Reference:3.6 (WATER = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE, WHITE COLORED, SLIGHTLY THICK LIQUID W/
STRONG, KETONE SOLVENT ODOR.
Percent Volatiles by Volume:80

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO2, HYDROGEN CHLORIDE, AND SMALL
AMOUNTS OF PHOSGENE.

Waste Disposal Methods:FOR SM QTYS, TRANSPORT TO HOOD/PROTECTED OUTSIDE
AREA & ALLOW SOLV TO EVAP. PEEL UP RESIDUE & DISCARD. FOR LRG AMTS,
TRANSPORT TO AUTHORIZED CHEMICAL WASTE TREATMENT FACILITY. DISPOSAL
MUST BE IN ACCO RDANCE WITH FEDERAL, STATE & LOCAL REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.